As a Copper Hot and Cold Basin Faucet Wholesale, share it with you.
The kitchen faucet at home will leak after being used for a long time. If you want to change a new kitchen faucet, it will take a lot of time. Therefore, the faucet manufacturer tells everyone how to prevent the kitchen faucet from leaking, not only can protect the faucet, but also solve the common leakage in life.
European Copper Retro Lavabo Basin Faucet
1. Water leakage at the joint of the connection pipe: Generally, the cap nut is loose. You can re-tighten the cap nut or replace with a new U-shaped gasket.
2. The cause of water leakage in the gap under the faucet bolt: it is caused by the wear of the triangular gasket in the gland. You can loosen the screw to remove the bolt head, then loosen and remove the gland, then take out the triangular gasket inside the gland and replace it with a new one.
3. The shaft gasket in the faucet is worn out: use pliers to loosen the gland and remove it, take out the shaft gasket with a clamp, and replace it with a new shaft gasket.
The method of repairing the faucet seems simple. Many parts and details are worthy of our attention. For example, when repairing the faucet, the water inlet valve must be closed first, and the wrench should not scratch the metal when removing the handle and unscrew the screw. When the faucet is opened, the spool or shaft rotates in the same direction as the direction of rotation. When replacing the washer, pay attention to whether the washer is flat or inclined, and buy the same washer to replace it. After fixing the new gasket on the spool, reinstall the assembly into the faucet and turn it clockwise. Don't scratch the metal, finally reset the handle and button, turn on the faucet to see if there is water leakage. This will solve the dripping of the faucet.
Our company also has European Copper Retro Lavabo Basin Faucet on sale, welcome to contact us.